|
 Automotive:
Fortron® PPS in continuous service with AdBlue®
For
its P800 diaphragm pump, automotive supplier Thomas Magnete of Herdorf, Germany, uses engineering polymers
from Ticona. The pump meters the aqueous additive AdBlue® – or more specifically, the AdBlue® solution
– in exhaust gas scrubbing systems using SRC catalytic converters.
View
PDF (1.476 KB)
 Mercedes engines with Fortron® PPS from Ticona
In
the development of
new air intake modules for its V6 and V8 engines, Mercedes used a combination of PA 4.6 and Fortron®
PPS from Ticona for the tumble valves.
View PDF (318 KB)
 Innovative
headlamp technology with Vectra® / Zenite® LCP
The market
trend is to design
smaller antifog headlamps with more powerful bulbs. Hence the temperature reached inside the housing
has increased dramatically and high temperature resistance materials are needed.
View
PDF (723 KB)
 Retrofittable oil pans made of Celstran® LFT
One
successful example of metal replacement under the hood is the retrofittable oil pan for the Smart made
of hot oil-resistant and impact-resistant Celstran® PA66 GF 40-02.
View
PDF (1.702 KB)
 Hostaform®
POM and Celstran® LFT
in crash-active head restraints
When
it comes to vehicle interior safety, requirements are high and material specifications correspondingly
strict. In the crashactive head restraint systems of the BMW 3 series, for example, Hostaform® POM and
Celstran® LFT are used to avoid the risk of neck injury (whiplash) in rear-end collisions.
View
PDF (1.333 KB)
 Celstran® LFT-PP-GF in the blower ring
To
construct these innovative blower ring jalousie, the developers used two Celstran ® grades from Ticona:
PP-GF 40-04 and PP-GF 50-04 – in combination they make the perfect solution.
View
PDF
(917 KB)
 Celstran®+
in the pedal system
Full speed ahead
for lightweight construction: Celstran®+ PP GF40-04 in the pedal system
View
PDF (387
KB)
 Luggage
rack strut made from Celstran®
Giant strength
from a lightweight: luggage rack strut made from Celstran® PA66-GF50-01
View
PDF (264
KB)
 Metal
replacement/Automotive:
Charge air duct made of extrusion
blow-moldable Fortron® PPS
Fuel-efficient engines with Fortron® PPS
View
PDF (320 KB)
 Automotive:
Safety in the tank - Hostaform® EC140XF
Hostaform®
EC140XF: This conductive carbon black-filled POM grade has particularly good electrical conductivity
and thus already conforms to the requirements of SAE J1645, the current standard for the dissipation
of electrical charges in fuel supply systems.
View PDF (684 KB)
 Metal replacement/Automotive: Hostaform® POM MetaLX with metallic
look
Hostaform® POM
MetaLX makes a dazzling impression in the Honda Accord with classy metallic-look door handles.
View
PDF (293 KB)
 Metal
replacement/Automotive: Fortron® PPS from Ticona
in air intake modules
Perfected performance: Mercedes engines with Fortron® PPS
from
Ticona
View PDF (1.778 KB)
|
